Installing a new gas appliance or re-installing an old one? Certified Appliance Accessories® carries twice-tested powder-coated flexible stainless steel gas connectors in a variety of diameters and thread ends as well flared zinc-plated-steel gas fittings. All are suitable for indoor or outdoor residential use. We also offer installation kits for gas dryers, ranges, water heaters and furnaces. Each kit contains a gas line, selection of adapters, pipe-thread sealant and leak-test solution. We recommend using a licensed gas and plumbing professional to install any of these gas connectors, fittings, and kits.

13 products found in Gas Connectors & Fittings

Sold out

Coated Stainless Steel Gas Range Installation Kit, 4 Ft.
  • $29.99
Coated Stainless Steel Gas Dryer Installation Kit, 4 Ft.
  • $38.99
Coated Stainless Steel Gas Appliance Installation Kit, 4 Ft.
  • $38.99
5/8-In. OD Flare (15/16-16 Thread) Steel Gas Fitting, 1/2-In. MIP x 3/8-In. FIP
  • $4.29
5/8-In. OD Flare (15/16-16 Thread) Steel Gas Fitting, 3/4-In. FIP
  • $4.49
5/8-In. OD Flare (15/16-16 Thread) Steel Gas Fitting, 3/4-In. MIP x 1/2-In. FIP
  • $4.59
1/2-In. OD Flare (Tapped) Steel Gas Fitting, 1/2-In. MIP x 3/8-In. FIP
  • $3.29
Coated Flexible Gas Connector, 5/8-In. OD, 1/2-In. MIP x 3/4-In. FIP Angle Valve
  • $29.99
Coated Flexible Gas Connector, 5/8-In. OD, 1/2-In. MIP x 3/4-In. MIP
  • From $23.99
Coated Flexible Gas Connector, 5/8-In. OD, 1/2-In. MIP x 1/2-In. MIP
  • From $22.99
Coated Flexible Gas Connector, 1/2-In. OD, 1/2-In. MIP x 1/2-In. MIP
  • From $24.99
Coated Flexible Gas Connector, 3/8-In. OD, 1/2-In. MIP x 1/2-In. FIP
  • From $24.99
Coated Flexible Gas Connector, 1/2-In. OD, 1/2-In. MIP x 1/2-In. FIP
  • From $22.99